Re: CDRDAO -- can it record iso files?

[http://dummy.us.eu.org/robert (Robert)]

 > From: Qian Gong <http://www.tue.nl/~q.gong>
 > Date: Wed, 12 Feb 2003 09:23:38 +0100
 >
 > > 
 > > Could I ask you one more question?: what does your TOC file look like?
 > > I'm still unable to get this to work.  Here's my TOC file:
 > > 
 > > CD_ROM
 > > TRACK MODE1
 > > DATAFILE "cd_image"
 > > 
 > 
 > Your TOC file looks OK.
 > 
 > > and here's the command I'm trying:
 > > 
 > > cdrdao write --eject --device 0,0,0 --driver generic-mmc --force 
 > > cdbackup.toc
 > > 
 > > I get this error:
 > > 
 > > ERROR: Drive does not accept any cue sheet variant - please report.
 > > ERROR: Writing failed.
 > > 
 > 
 > Could you send all the messages after the command? And what do you get
 > with the command "cdrdao write --device 0,0,0 --driver generic-mmc
 > cdbackup.toc"?

Yes.  It's all below.  You'll notice:

1) blanking seems to work
2) (surprisingly) small ISO images work:
   a) written via cdrecord
   b) "mount" of the CD-ROM works
3) cdrdao doesn't work, even with small ISO images

Thanks again.

 > Regards,
 > 
 > Qian

screw:~# cdrdao blank --device 0,0,0
Cdrdao version 1.1.7 - (C) Andreas Mueller <http://www.daneb.de/~andreas>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.

Using libscg version 'andreas-0.5-UNIXWARE_Patch'

0,0,0: SAMSUNG CDRW/DVD SM-308B	Rev: T100
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0010)

Blanking disk...
Blanking time: 49 seconds
screw:~# mount /cdrom
mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
       or too many mounted file systems
screw:~# cdrecord -v -eject dev=0,0,0 -data cd_image
Cdrecord 2.0 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.7'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'SAMSUNG '
Identifikation : 'CDRW/DVD SM-308B'
Revision       : 'T100'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO 
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1374208 = 1342 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data     0 MB         padsize:  504 KB
Total size:        0 MB (00:04.02) = 302 sectors
Lout start:        1 MB (00:06/02) = 302 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 6
  Reference speed: 2
  Is not unrestricted
  Is erasable
  ATIP start of lead in:  -11680 (97:26/20)
  ATIP start of lead out: 337348 (74:59/73)
  1T speed low:  0 (reserved val  0) 1T speed high:  4
  power mult factor: 4 5
  recommended erase/write power: 3
  A1 values: 02 4A B0
  A2 values: 00 00 00
Disk type:    Phase change
Manuf. index: 23
Manufacturer: SKC Co., Ltd.
Blocks total: 337348 Blocks current: 337348 Blocks remaining: 337046
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Last chance to quit, starting real write in 9 seconds.   8 seconds.   7 seconds.   6 seconds.   5 seconds.   4 seconds.   3 seconds.   2 seconds.   1 seconds.   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0

Track 01:    0 of    0 MB written.
Track 01: writing 504 KB of pad data.
Track 01: Total bytes read/written: 98304/614400 (300 sectors).
Writing  time:    9.069s
Average write speed   1.1x.
Fixating...
Fixating time:   80.862s
cdrecord: fifo had 2 puts and 2 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
screw:~# mount /cdrom
screw:~# umount /cdrom
screw:~# cdrdao blank --device 0,0,0
Cdrdao version 1.1.7 - (C) Andreas Mueller <http://www.daneb.de/~andreas>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.

Using libscg version 'andreas-0.5-UNIXWARE_Patch'

0,0,0: SAMSUNG CDRW/DVD SM-308B	Rev: T100
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0010)

Blanking disk...
Blanking time: 49 seconds
screw:~# cdrdao write --eject --device 0,0,0 --driver generic-mmc --force /root/cdbackup.toc
Cdrdao version 1.1.7 - (C) Andreas Mueller <http://www.daneb.de/~andreas>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.

WARNING: Track 1: Length is shorter than 4 seconds.
Using libscg version 'andreas-0.5-UNIXWARE_Patch'

0,0,0: SAMSUNG CDRW/DVD SM-308B	Rev: T100
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)

Starting write at speed 4...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
Executing power calibration...
Power calibration successful.
ERROR: Drive does not accept any cue sheet variant - please report.
ERROR: Writing failed.